CJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board
10 in stock
Features :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
₹93.22 ₹118.64
10 in stock
CompareAbout TCA9548A I2C Multiplexer Module
You just found the perfect I2C sensor, and you want to wire up two, three, or more of them to your Arduino. When you realize “Oh no, this chip has a fixed I2C address, and from what I know about I2C; you cannot have two devices with the same address on the same SDA/SCL pins”. Are you out of luck? You would be if you don’t have this cool CJMCU-9548 TCA9548A I2C 8 Channel Multiple extensions development board.
The CJMCU TCA9548A I2C Multiplexer development board is interesting in that it has an I2C address (0x70 by default) – and you basically send it a command to tell it which I2C multiplexed output you want to talk to, then you can address the board you want to address.
Package Includes :
- 1 x CJMCU TCA9548A I2C 8 Channel Multiple extensions development board.
- 2 x Header set ( Without Soldered).
| Weight | 0.004 kg |
|---|---|
| HSN Code | 85429000 |
Based on 0 reviews
Be the first to review “CJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board”
You must be logged in to post a review.
You may also like…
-
-
Displays, Electronic Components, OLED Display
2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Displays, Electronic Components, OLED Display2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
SKU: TAF5-004
Related products
-
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Miscellaneous components
MP3-TF-16P MP3 Disk TF Card Module
It’s a small and low-cost MP3 module player with a simplified output directly to the speaker. It can be used as a stand-alone module with an attached battery, speaker, and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.This perfectly integrates the hard decoding module, which supports common audio formats such as MP3, WAV, and WMA. Besides, this module also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations.SKU: TBF5-003 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
Electronic Components, IoT & Wireless BoardsAi Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: TAF7-004
There are no reviews yet.