fbpx
-20%
,

LILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality

Availability:

3 in stock


  1. Working current:150 mA
  2. Sleep current: 220 uA
  3. Working temperature range:-40℃ ~ +85℃
  4. Power Supply Input:USB 5V/1A
  5. Charging current:500mA
  6. Battery Input:3.7-4.2V
  7. Battery:3.7V lithium battery

2,711.86 3,389.83

3 in stock

Compare

 

TTGO T-Higrow Esp32Wroom Introduction

This product comes with Wifi Bluetooth Humidity Photometric Electrolyte Sensor Unsoldered. The capacitive soil moisture sensor differs from most of the resistive sensors on the market, using the capacitive sensing principle to detect soil moisture. It avoids the problem that the resistance sensor is easy to corrode and greatly prolongs its working life.S18B20 waterproof temperature sensor is used for this product and t-watch with the t-grove interface. For example, it can be used to test the temperature and humidity of flowerpot soil and environment, as well as the water temperature of fish tanks when raising fish.

  • This capacitive soil moisture sensor differs from most of the resistive sensors on the market, using the capacitive sensing principle to detect soil moisture.
  • It avoids the problem that the resistance sensor is easy to corrode and greatly prolongs its working life.

Note:

  • Since BME280 already includes temperature and humidity sensors, it already includes the function of DHT11, we have removed the DHT11 sensor on the BME280 version to reduce costs.

Specifications

 MCU ESP32 chip
FLASH 4MB
Wi-Fi 802.11 b/g/n
 Xtensa dual-core 32-bit LX6 microprocessor
Bluetooth  BLE V4.2
Onboard Reset Button + Custom Button IO35 + ABS material shell + Jst 2pin 1.25mm connector
Version Optional DHT11/ BME280 Version
Digital 16bit Ambient Light Sensor SDA: IO25; SCL: IO26
IC Name BH1750
Interface I2C bus
 Wide range and Highest resolution(1 – 65535 lx)
50Hz/ 60Hz Light noise reject-functionButton: IO0Wake up : IO35ResetUSB to TTL: CP2104Modular interface:UART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、capacitor touch sensor、ADC、DACLNA pre-amplifier

On-board clock: 40MHz crystal oscillator

Temperature and humidity sensor DHT11

Reserved extension interface:21~22

Working current: About 150 mA

Sleep current: About 220 uA

Working temperature range: -40℃ ~ +85℃

Size&Weight:155.04358.19mm(13.65g)

Power Supply Specifications

Power Supply Input: USB 5V/1A

Charging current:500mA

Battery Input: 3.7-4.2V

Battery:3.7V lithium battery

Charge IC: TP4054

JST Connector:2Pin 1.25mm

USB: Type-C

Wi-Fi

Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC (ESP32 chip)

Protocol:802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4μS Protection interval

Frequency range:2.4GHz~2.5GHz(2400M~2483.5M)

Transmit Power:22dBm

Communication distance:300m

Bluetooth

Protocol: Meet Bluetooth v4.2BR/EDR and BLE standard

Radiofrequency:With -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH

Audio frequency CVSD&SBC audio frequency

Software specification

Wi-Fi Mode:Station/SoftAP/SoftAP+Station/P2P

Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS

Encryption Type: AES/RSA/ECC/SHA

Firmware upgrade: UART download/OTA(Through network/host to download and write firmware)

Software Development: Support cloud server development /SDK for user firmware development

Networking protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT

User Configuration: AT + Instruction set, cloud server, android/ios app

OS: FreeRTOS

Main function

  1. Soil Fertility detection
  2. Soil moisture detection
  3. Light intensity detection
  4. Ambient temperature and humidity 6. USB+200mA battery
  5. Low power sleep

Using Arduino IDE

  1. Install the current upstream Arduino IDE at the 1.8 level or later. The current version is at the Arduino website.
  2. Start Arduino and open Preferences window. In additional board manager add url: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json .separating them with commas.
  3. Copy or move the folder in the lib directory to <C:UsersYour User NameDocumentsArduinolibraries>
  4. Board select Tools -> Board -> ESP32 Dev Module
  5. In configuration.h, you can select hotspots and connect to wireless WiFi, and you can change and add sensors. For details, please refer to configuration.h
  6. Build and Upload the sketch
  7. View the obtained ip address in the serial output, enter the ip address in the browser to view the data.

Using PlatformIO

  1. Install VSCODE and Python
  2. Search for the PlatformIO plug-in in the VSCODE extension and install it.
  3. After the installation is complete and the reload is completed, there will be a small house icon in the lower left corner. Click to display the Platformio IDE home page
  4. Go to file – > Open folder – > Select the LilyGo-HiGrow
  5. Click the (√) symbol in the lower left corner to compile (→) for upload.

Package Includes:

1 x Unsoldered TTGO T-Hi-grow-ESP32wroom chip Wifi Bluetooth Humidity Photometric Electrolyte Sensor

 

SKU: TBF2-005 Categories: ,
Weight 0.022 kg
Chipset ESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6
Working current(mA) 150 mA
Sleep current(uA) 220 uA
Power Supply Input USB 5V/1A
Charging current(mA) 500mA
Battery Input(V) 3.7-4.2V
Battery Required(V) 3.7V lithium battery
Frequency range(GHz) 2.4GHz~2.5GHz
Transmit Power(dBm) 22dBm
Communication distance (m) 300m
Working temperature range -40~85℃
Length (mm) 155
Width (mm) 36
Weight (gm) 20
Shipment Weight 0.03 kg
Shipment Dimensions 16 × 7 × 1 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LILYGO®TTGO T-Higrow ESP32wroom WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Fantastic Quality”

There are no reviews yet.