-27%
Electronic Components, Power Supply
Hi Link HLK PM01 5V/3W Switch Power Supply Module
SKU: PWR-7002
Availability:
18 in stock
220V AC to 5V DC, 600mA PCB Mounted Step-Down Power Supply Module
Features
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
₹220.00 ₹300.00
18 in stock
Dimensions
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
Specifications:
| AC Input Voltage Range | 90 ~ 264V |
| Input Low Voltage Efficiency | Vin=110VAc, Output full-load: 69% |
| Input High Voltage Efficiency | Vin=220VAc, output full-load: 70% |
| Long-term reliability | MTBF 100000h |
| Load rated output voltage | +5±0.1 |
| Short-term maximum output current | 1000mA |
| The maximum output current for a long time: | 600mA |
| Operating Temperature: | -20 to +60°C |
| Store Temperature | -40 to +80°C |
| Relative humidity | 5 to 95% |
| Rated input voltage | 100-240VAc |
| Maximum input current | <0.2A |
| Input current surge | <10A |
| Dimensions in mm (LxWxH) | 33 x 19 x 15 |
| Weight(gm) | 22 |
| Color | Black |
| Output DC Voltage | 5V |
| Voltage Regulation | ±0.2 % |
| Load Regulation | ±0.5 % |
| Shipment Weight | 0.06 kg |
| Shipment Dimensions | 8 × 5 × 3 cm |
Environmental Conditions :
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
Documents:
Based on 0 reviews
Be the first to review “Hi Link HLK PM01 5V/3W Switch Power Supply Module”
You must be logged in to post a review.
You may also like…
Related products
-
Electronic Components, IoT & Wireless Boards, Microcontroller Boards
NodeMCU ESP8266 development Board (CP2102)
Electronic Components, IoT & Wireless Boards, Microcontroller BoardsNodeMCU ESP8266 development Board (CP2102)
NodeMCU ESP8266 is an open-source Lua based firmware and development board specially targeted for IoT based applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems and hardware which is based on the ESP-12E module, and like this, it can also be programmed using Arduino IDE and can act as both WiFi Hotspot or can connect to one.
SKU: ESP-1002 -
Electronic Components, Miscellaneous components
4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
Electronic Components, Miscellaneous components4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: MISC-11009 -
Electronic Components, Motors & Motor Drivers
L293D Motor Driver Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, and internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: M-9002
There are no reviews yet.