fbpx
-44%
,

Arduino Uno R3 SMD Atmega328P Board – Clone Compatible Model

Availability:

19 in stock


  1. Microcontroller ATmega328 (SMD) – Interface CH340G
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 5-20V
  5. Digital I / O Pins 14 (of which 6 provide PWM output)
  6. Analog Input Pins: 6

283.90 508.47

19 in stock

Compare

The Arduino Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.
We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without the CH340 chip.

Main changes from the older version:

1. Two rows of holes for the pins (Male and Female). So it can be connected with normal Female Jumpers.
2. Additional 3 rows of holes for wiring.
3. Changes to the DIP package of ATMEGA328P to flat package.
4. CH340G replace ATmega16U2


Package Includes :

1 x Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
1 x set of male Jumper Header.

Weight 0.027 kg
Model Type Arduino Uno R3
Microcontroller Chip ATmega328 (SMD) – Interface CH340G
Operating Voltage (VDC) 5
Input Voltage(Recommended) 7-12V
Input Voltage (limit) 6-20V
Analog I/O Pins 6
Digital I/O Pins 14 (of which 6 provide PWM output)
PWM Digital I/O Pins 6
DC Current for 3.3V Pin (mA) 50
DC Current per I/O Pin (mA) 40
Clock Speed 16 MHz
SRAM 2
EEPROM 1 KB (ATmega328)
Flash Memory 32 KB
Power Supply Option DC Jack or USB
On Board LEDs On/Off, L (PIN 13), TX, RX
Operating Temperature (°C) -40 to 90
Dimensions in mm (LxWxH) 75 x 54 x 12
Weight (gm) 26
Shipment Weight 0.05 kg
Shipment Dimensions 10 × 6 × 4 cm