Electronic Components
Showing 25–48 of 86 results
-
Electronic Components
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
- It uses 2.4GHz global open ISM band, with license free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
SKU: TDF2-005 -
Electronic Components, Sensors
Vibration Sensor Module SW-420
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: TFF2-003 -
Electronic Components, Relays
1 Channel 5V Relay Module without Optocoupler
- The 8550 transistor drive, driveability.
- It has a relay status indicator led Power LED(Green).
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3-line structure.
SKU: TAF3-004 -
-
Displays, Electronic Components, OLED Display
2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Displays, Electronic Components, OLED Display2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
SKU: TAF5-004 -
Electronic Components, IoT & Wireless Boards
433MHz 100 Meters STX882 ASK Transmitter Module & SRX882 Superheterodyne Receiver Module + Antenna
Electronic Components, IoT & Wireless Boards433MHz 100 Meters STX882 ASK Transmitter Module & SRX882 Superheterodyne Receiver Module + Antenna
- Frequency Range: 433 MHZ
- ASK /OOK modulation mode
- Super anti-power interference
- Low-power sleep less than 1uA
- Low self-radiation
- Small size
- Frequency stability and reliability
- Various international testing standards
SKU: TBF4-005 -
Electronic Components, Relays
5V 7A PCB Mount Sugar Cube Relay – SPDT (Pack Of 5)
- 100% Brand new and high quality
- Compact, lightweight, and durable
- Control(coil) Voltage: 5V
- Pin: 5Pin
- Load voltage/Current: 7A 250V~10A 30VDC/10A 125VAC~10A28VDC
- Application: Modules, Development board, Connector, Cables & Adapters, DIY PCB Universal Board, IC Sockets
- Quantity: 5pcs
- Color: Blue HL Make or as per availability
- Size: Approx. 1.8 x 1.5 x 1.6cm (L*W*H)
SKU: TDF4-002 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
Electronic Components, IoT & Wireless BoardsAi Thinker A9G GSM/GPRS+GPS/BDS Development Board Original Quality
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: TAF7-004 -
Electronic Components, Miscellaneous components
4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
Electronic Components, Miscellaneous components4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: TBF5-007 -
Electronic Components, Microcontroller Boards
Arduino Nano V3.0 Development Board – Clone Compatible Model (Unsoldered)
Electronic Components, Microcontroller BoardsArduino Nano V3.0 Development Board – Clone Compatible Model (Unsoldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: TBF6-005 -
Electronic Components, Mux-Demux Modules
CJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board
Electronic Components, Mux-Demux ModulesCJMCU-9548 TCA9548A I2C Multiplexer | 8 Channel Multiple Extensions Development Board
Features :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- Active-Low Reset Input.
- Power Up With All Switch Channels Deselected.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
SKU: TBF5-004 -
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: TAF6-001 -
Electronic Components, Sensors
DS18B20 Water Proof Temperature Sensor Probe Good Quality
- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: S-6005