Electronic Components
Showing 1–24 of 86 results
-
Electronic Components, Berg Strips
1×40 Pin 2.54mm Pitch Male Berg Strip – Break Away Header – Straight
Electronic Components, Berg Strips1×40 Pin 2.54mm Pitch Male Berg Strip – Break Away Header – Straight
- Number of Pins: 40.
- Pin Spacing(pitch): 2.54 mm.
- Pin height: 6 mm.
- Square Posts.
- Stackable End to End and Side to side.
- It can be manually broken for the length needed.
- Standoffs allow cleaning of solder contaminants.
SKU: TFF6-004 -
-
Electronic Components, Displays, LCD Display
3.5in TFT Touchscreen display | 480×320 TFT Touch Screen High Quality Display
Electronic Components, Displays, LCD Display3.5in TFT Touchscreen display | 480×320 TFT Touch Screen High Quality Display
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
SKU: TAF5-006 -
Electronic Components
9v Battery Snap Connector + DC Jack(Battery Connector Cap)
- Excellent Material.
- Fine workmanship.
- It is an environmental 9V battery buckle.
- T- fonts, with red and black connecting lines.
- Save power and protect the environment.
- Good electrical conductivity and comfortable sense of touch.
SKU: TFF5-004-1 -
Electronic Components, Sensors
ACS712 20A Current Sensor Module Good Quality
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: TBF2-003 -
Electronic Components, Microcontroller Boards
Arduino Mega 2560 R3 Board Good Quality Clone CH340G Board
Electronic Components, Microcontroller BoardsArduino Mega 2560 R3 Board Good Quality Clone CH340G Board
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: TBF6-004 -
Electronic Components, Sensors
EM-18 RFID READER MODULE
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64–bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency: 125 kHz
- Read Distance: 5 cm
- Compatible Tags: 125KHz EM4100 Tags
- Size : 32mm(length) * 32mm(width) * 8mm(height)
SKU: TBF5-008 -
Electronic Components
EP24 Thermal Printer With Case 5V-9V compatible with ESP32/Arduino
- Low-noise direct thermal printing method
- Fast printing speed, low noise
- Can support Max.40MM (diameter) paper roll, around 16-20 meter. Optional serial interface (RS-232C, TTL) / USB port
- Rich of graphics / curves / characters print function
- Easy paper loading structure
- Support 5V-9V wide power voltage
SKU: TDF7-005 -
IoT & Wireless Boards, Electronic Components
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
IoT & Wireless Boards, Electronic ComponentsESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: TAF7-005-1 -
Electronic Components, Miscellaneous components
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
Electronic Components, Miscellaneous componentsINMP441 MEMS High Precision Omnidirectional Microphone Module I2S
- Digital I2S interface with high-precision 24-bit data
- The high signal to noise ratio is 61 dBA
- High sensitivity – 26 dBFS
- Stable frequency response from 60 Hz to 15 kHz
- Low power consumption: low current consumption 1.4 mA
- High PSR: -75 dBFS
SKU: TAF6-006 -
Electronic Components, Power Supply
LM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
Electronic Components, Power SupplyLM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
SKU: TBF5-002 -
Sensors, Electronic Components
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: TBF3-004 -
Sensors, Electronic Components
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide, and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: TBF3-006 -
Electronic Components
NEO-6M GPS Module with EPROM Best Qu
- 5Hz position update rate.
- The cold start time of 38 s and the Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: TBF1-003