Electronic Components
Showing 1–24 of 64 results
-
-
Electronic Components, Relays
1 Channel 5V Relay Module without Optocoupler
- The 8550 transistor drive, driveability.
- It has a relay status indicator led Power LED(Green).
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3-line structure.
SKU: R-5001 -
Mechanical Switches, Electronic Components
12x12x12mm Tactile Push Button Switch-10Pcs.
- Through-hole design.
- Shaft Shape: Round
- Function: Push to ON
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles was realized despite the high operating force
- Middle stroke (1.05mm)
SKU: n/a -
Displays, LCD Display
16×2 LCD Display Green Backlight
This is a basic 16-character by 2-line Alphanumeric display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need a Minimum of 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4-bit and 8-bit Modes.
SKU: LCD-8001 -
-
Displays, Electronic Components, OLED Display
2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Displays, Electronic Components, OLED Display2.32 cm (0.91 inch) I2C/IIC 128×32 Serial 4-Pin OLED Display Module
- Size: 0.91 inch
- Resolution: 128 x 32
- Controlling Chip: SSD1306
- Display Area: 22.384 x 5.584mm
- Driving Voltage: 3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
SKU: OLED-8003 -
Electronic Components, IoT & Wireless Boards
433MHz 100 Meters STX882 ASK Transmitter Module & SRX882 Superheterodyne Receiver Module + Antenna
Electronic Components, IoT & Wireless Boards433MHz 100 Meters STX882 ASK Transmitter Module & SRX882 Superheterodyne Receiver Module + Antenna
- Frequency Range: 433 MHZ
- ASK /OOK modulation mode
- Super anti-power interference
- Low-power sleep less than 1uA
- Low self-radiation
- Small size
- Frequency stability and reliability
- Various international testing standards
SKU: n/a -
Electronic Components, Miscellaneous components
4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
Electronic Components, Miscellaneous components4×4 Matrix Membrane Type Keypad Switch for Arduino, ARM and other MCU -16 Keys
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: MISC-11009 -
Electronic Components, Relays
5V 7A PCB Mount Sugar Cube Relay – SPDT (Pack Of 5)
- 100% Brand new and high quality
- Compact, lightweight, and durable
- Control(coil) Voltage: 5V
- Pin: 5Pin
- Load voltage/Current: 7A 250V～10A 30VDC/10A 125VAC～10A28VDC
- Application: Modules, Development board, Connector, Cables & Adapters, DIY PCB Universal Board, IC Sockets
- Quantity: 5pcs
- Color: Blue HL Make or as per availability
- Size: Approx. 1.8 x 1.5 x 1.6cm (L*W*H)
SKU: R-5003 -
Relays
5V Dual Channel Relay Module with Optocoupler
- Low-Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic-level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: R-5002 -
Electronic Components, IoT & Wireless Boards
Ai Thinker A9G GSM/GPRS+GPS/BDS Development Board
A9G GSM/GPRS+GPS Modules is a quad-band GSM/GPRS module based on RDA8955 SoC and comes with 29 GPIOs and an integrated SDK. These modules support the basic phone voice call/SMS, serial to GPRS, and GPS data transmission functions which can be used in a wide range of applications. The A9G modules allow users to make a voice call, use SMS services, and access the internet and base position with only a 2G SIM card. These modules operate at -20°C to 70°C temperature range. Applications include IoT, vehicle-mounted equipment, remote localization, and electric power environment monitoring.
SKU: MISC-11004 -
Electronic Components, Microcontroller Boards
Arduino Nano V3.0 Development Board – Clone Compatible Model
Electronic Components, Microcontroller BoardsArduino Nano V3.0 Development Board – Clone Compatible Model
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: ARD-102 -
Electronic Components, Microcontroller Boards
Arduino Uno R3 SMD Atmega328P Board – Clone Compatible Model
Electronic Components, Microcontroller BoardsArduino Uno R3 SMD Atmega328P Board – Clone Compatible Model
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: ARD-101 -
Electronic Components, Sensors
BMP180 Barometric Pressure Sensor Module compatible with Arduino
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
SKU: S-6003 -
-
-
Electronic Components, Sensors
DHT11 Temperature and Humidity Sensor Module
DHT11 is a low-cost digital sensor for sensing temperature and humidity. This sensor can be easily interfaced with any micro-controller such as Arduino, Raspberry Pi etc to measure humidity and temperature instantaneously.
SKU: S-6001
